Roll to Roll Automatic Punching Machine

 

Model: R2-1000

Category: FPC Puncher Machine

Exhibitor: KUANG CHIEN COMPUTER CO., LTD.

Booth No: TBA

 

Characteristic

 

1. WORK AREA : W250*L510 mm 2. SUITABLE MATERIAL: FPCB, PET, PC, film, membrane panel, etc. 3. PROCESS SPEED: 0.38 sec/hole (At pitch Y=5mm, Y axis linear travel, base on COMWEB standard film and FPCB) 4. PROCESS ACCURACY: ±25 μm compare to the print mark 5. PROCESS THICKNESS: 0.04~0.30mm FPC, the other thickness depending on materials. 6. PUNCH SIZE: Standard Φ2, Φ3, Φ3.175 mm (Particular size can be customize) 7. MONITOR: TFT 15” LCD 8. CCD CAMERA VIEW RANGE: FOV ABOUT 6.4*4.8mm. 256 Levels Monochrome 9. ILLUMINATION: One set white transparent light 10. CENTER PROCESS: The CCD camera can recognize targets after the program teach the target coordinate 11. SELF-ACCURACY CHECKING: CPK bar chart to analyze the process accuracy 12. FLAT MATERIAL: The tension flat structure 13. EDGE POSITION CONTROLLER: DPI 0.1mm, edge position about 0.5mm 14. AIR EXPANDING SHAFT: Diameter 6” (optional: 3”), transmission shaft internal diameter 35mm. 15. AIR PRESSURE SUPPLY: ABOVE 5HP, dry and dust-disposal clean air 16. POWER: Single-phase AC220V ±5% 1KVA 50/60Hz 17. MACHINE WEIGHT: About 1500kgs 18. MACHINE SIZE: W201*D143*H177 cm

 

Other Products

 

• 

  ceramic substrate -Sputter coating

• 

  Activator PC-65

• 

  Automatic Optical Inspection

• 

  High Torque Precision Spindle

• 

  Auto Mylar Peeler

• 

  ALKALINE ETCHING SOLUTIONS

• 

  Differential Scanning Calorimetry

• 

  Frequency Converter

• 

  Bakelite

• 

  Automated Optical Shaping

 

 

 

Back